TPI 9071 Smart Vibration Meter BNC Cable Accelerometer with Magnet
Call
ติดต่อสอบถาม

The TPI 9071 is a simple, easy to use, low cost vibration meter. Record, analyse and display vibration signals at the push of a button.

  • Built-in ISO Alarms
  • Find machine faults before they stop your machine
  • Increase productivity and lower maintenance costs
  • Full Color LED Display
  • Collect data
  • Standard Cable mounted accelerometer with magnet
  • ISO built-in Alarms
  • Easily identify bearing problems with BDU Reading
  • Easily identify problems with built-in band filters:
    1X (unbalance)
    2X (misalignment)
    3X (looseness)
  • 800 line FFT (spectrum)
  • Ruggedized IP67 case

 

 Model 9071 Specifications
Size H 7.95″ W 2.36″ 200 mm x 60mm x 26mm
Weight 9.8oz (280g)(not including magnet)
Environmental * Water: IP67 Waterproof
* Operating: 32°F to 122°F (0°C to 50°C)
* Storage: -4°F to 158°F (-20°C to 70°C)
Power Supply 2xAA batteries
Battery Life Approximately 50 hours of normal use
Frequency Ranges 2/10Hz – 1kHz ISO
2Hz – 10kHz Total g
1kHz – 10kHz Bearing Analysis
Frequency Resolution 100 / 800 lines
Displayed Amplitude Units Acceleration in g
Velocity in inches per second or mm per second
Bearing Damage in BDU
Displayed Frequency Units Hz, CPM or RPM
Input Range +/- 50 g (with supplied accelerometer)
Dynamic Range 72 dB (0.05g resolution)
Auto set up of VA bands Yes
Measurement Storage 10 blocks / 20 readings per block
Accelerometer Connection BNC connector cable with removable magnet (1mV/g – 10,000mV/g)
Reading Storage 10 blocks/ 20 readings per block
Standard Accessories A9012 IEPE accelerometer with cable
A9073 magnet
A9074 Soft pouch
Optional Accessories A9086 Protective boot with magnets

 

 

 Download : Data sheet